E3 FUEL SYSTEMS
a nano technology company
| Home | PRODUCT TECHNOLOGY | E3 EPS BINDER | E3 EPS SALES KIT | CONTACT US |
EPS Nano Fuel Technology is
an innovative breakthrough in the field of Fuel Technology. It
is also a leading application in the growing field of Nano Technology.
EPS Nano Fuel Technology was conceived in 1991 in
The technology has been patented in over 21
countries and has won environmental awards in China.
The technology has been repeatedly tested and analyzed by
various institutions such as –
The Percolation Hydrodynamics
Research Institute
of the
The Neutron Laboratory of the
Atomic-Physics Research
Institute of the
of Atomic Energy.
The
The National
Their test and analysis prove that fuels passing through an
EPS Nano Fuel Product have been
completely transformed to Nano fuels. When
a conventional fuel is tested by the small-angle neutron scattering (SANS)
method, the fuel molecules appeared in clusters with diameter sizes of 300
nanometers or larger. When the same fuels is processed through an EPS Nano Fuel
Device, the SANS method reveals that the fuel molecule sizes have
been reduced to 3 nanometers or less.
This is the only Fuel Processing Technology known today
that does this.
The benefits of this technology are tremendous for the
consumer and the environment. When EPS Nano fuels are used in an engine, fuel
efficiency is improved, power is enhanced, pollution is substantially reduced,
the engine runs quieter and smoother and its service life is extended.
The technology can be applied to a wide range of fuels and
applications. It works well on gasoline, kerosene, diesel fuel, heating oils and
natural gas. It can be applied to a variety of small and very large engine and
fuel burning products. EPS Products have been installed on motorcycles,
automobiles, large and small trucks, small boats and ocean going vessels, farm
equipment, construction equipment, machinery, oil-rig generators and
locomotives.
The EPS technology has been transformed into a complete
product line to serve just about every
application that uses fuel.
There is no other technology available that can compare
with the substantiated results of
EPS Nano Technology.
Effect of Aftermarket Parts on OEM Warranty
The original manufacturer's warranty cannot be voided simply because an aftermarket part is used on a vehicle. Each manufacturer's warranty has specific language addressing situations that are not covered, mostly for modifications to the engine that cause damage. This is altogether different from adding a performance improving part such as the EPS Nano-fuel device. The only grounds a manufacturer could deny warranty coverage on would be if the EPS Device CAUSED damage to the vehicle. The manufacturer or dealer would have to prove this, not merely claim it. Of course there are unscrupulous dealers who may claim any aftermarket parts void the warranty ... this is a well-circulated rumor, but not legal.
Following is the reference for the federal law that prohibits OEM's from voiding warranties due to the use of aftermarket or by-pass systems.
US Code - Title 15, Chapter
50, Sections 2301-2312
Legally, a vehicle manufacturer
cannot void the warranty on a vehicle due to an aftermarket part unless they can
prove that the aftermarket part caused or contributed to the failure in the
vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) . For best
results, consider working with performance oriented dealerships with a proven
history of working with customers. If your vehicle manufacturer fails to honor
emission/warranty claims, contact EPA at (202) 260-2080 or www.epa.gov.
If federal warranty protection is
denied, contact the FTC at (202) 326-3128 or www.ftc.gov.
Here are a few manufacturers’ comments regarding aftermarket parts:
Dodge Motors:
"Certain changes that you might make to your
truck do not, in or by themselves, void the warranties described in this
booklet. Examples of some of these changes are: installing non-Chrysler parts,
components, or equipment" Reference 1997
Warranty
Information supplement to Dodge Owner's Manual
Ford Motor Company:
"Installation of a non-genuine Ford item . . .
does not, in and of itself, render our warranty void." - Ford Owner
Relations Division
General Motors Corporation:
"If a Chevrolet part fails due to a defect in material or workmanship not
related to {an aftermarket product} or the labor to install it, Chevrolet would
be responsible for covering the failed part”.Chevrolet Customer Assistance
Center
Please feel free to contact us if you have any
questions.
Now in a new facility to better serve your needs.
E3FS, a Division of InCo Inc.
North Hampton, NH 03862
phone: